DIY Bathroom Tiling Guide for Saudi Arabia: How to Tile Your Bathroom Like a Pro

Tiling a bathroom is one of the most rewarding DIY home improvement projects. With the right tools, materials from Benna, and patience, you can achieve professional-quality results. This guide walks you through the complete bathroom tiling process.

Materials You'll Need from Benna

• Floor and wall tiles (add 10% extra for cuts and waste)

• Tile adhesive (grey or white depending on tile color)

• Grout (matching or contrasting color)

• Tile spacers (1.5mm or 2mm for standard joints)

• Silicone sealant for corners and wet area joints

• Waterproofing membrane for shower floor and walls

Step-by-Step Tiling Process

Step 1: Surface Preparation

Clean surfaces, remove old tiles or adhesive, repair cracks, and ensure walls/floors are level and plumb. Apply waterproofing membrane to shower areas and cure for 24 hours.

Step 2: Planning the Layout

Find the center of the floor and mark reference lines. Plan the tile layout to minimize small cuts at edges. Start tiling from the center and work outward.

Step 3: Apply Adhesive and Set Tiles

Mix adhesive according to manufacturer instructions. Apply with a notched trowel, comb ridges in one direction. Press tiles firmly into adhesive using a slight twisting motion. Use spacers for consistent joints.

Step 4: Grouting and Sealing

Allow adhesive to cure for 24 hours before grouting. Remove spacers, mix grout, and apply diagonally across tile faces. Remove excess grout with a damp sponge. Apply silicone sealant to all internal corners after grout cures.